Table of Contents
Advertisement
24
• If the film is not prop¬
erly loaded. [ 0_
E
]
on
the
LCD
panel
blinks, indicating that
the film is not loaded
properly.
Open
the
back cover and load
the film once again.
1
5
5. Close the back cover and set the drive mode switch
to a position other than [ L ]. The film automatically
advances to the first frame.
• Check that | )
1
and [ 0.^ ] are displayed on the LCD
panel.
• The film counter indication advances one each time
the shutter is released.
Advertisement
Table of Contents
