Using Snap-In Focus Function.49 - Pentax ZX-5 Operating Manual

1
2
How to focus on the subject
1. Set the focus mode switch to [MF].
2. While looking through the viewfinder, turn the focus¬
ing ring to the right or left until the image in the view¬
finder is clearest.
49
Using the snap-in focus function
When the subject comes to the point where the lens
was prefocused, the shutter is automatically released.
How to use
1. Use a non-autofocus lens.
2. Set the focus mode switch to [AF].
3. Focus at the point where you wish to capture the
subject.
4. Using the optional 'Cable Switch F', keep the trigger
release button depressed so that the autofocus and
metering systems stay active.
5. The camera releases the shutter automatically when
the subject comes into focus at the point selected.