Fan Operation - Hitachi RAS-CH10PCAST Operation Manual

FAN OPERATION

In Fan operation mode the device is function as an air circulator.
■ FAN Function
During FAN operation, compressor does not run and there is no cooling operation with only indoor fan running.
Press the
1
(FAN).
Set the desired FAN SPEED with the
(the display indicates the selectable setting).
(HI)
2
(MED)
(LOW)
(SILENT) : Silent fan speed.
Press the
START
Press the button again to stop the operation.
■ As the settings are stored in memory in the remote controller, you
only have to select
button next time.
– 10 –
selector button so that the display indicates
: High fan speed.
: Medium fan speed.
: Low fan speed.
button. Fan operation starts with a beep.
(FAN) then press the
button.