Table of Contents
Advertisement
Detergent pump operating minutes display.
Rinse aid pump operating minutes display.
Energy consumption (kW) display
The Pc option indicates the total kW consumed since installation of the
dishwasher or since the latest reset.
Customisation of duration of program P4.
N.B.: the machine must be set on "P4", see "6.7 Setting program P4
duration".
Displaying the cycle count
When scrolling through the appliance parameters the item
count of the cycles the dishwasher has performed since installation, will be
found.
This parameter cannot be modified or reset unless the software is
reprogrammed.
SETTING THE MODEL (for After-Sales Service only)
In the event of replacement of the circuit board (used on several models)
scroll through to the last modifiable parameter option to select the
appropriate model, "PRF400", "PRF500", "CAPOTE". This operation
must be carried out with the tank empty and door open.
Indicator lights as follows:
6.1.1 Setting up rinse aid delivery
* default value (factory preset)
off;
green;
orange;
Modify the value of the parameter
by pressing
"tc 88888"
, the total
flashing.
.
RINSE AID
Delivery time
Delivery
(s)
quantity (c.c.)
0
6
12
18
24
30 *
26
48
0,0
0,6
1,2
1,8
2,4
3,0
3,6
4,2
8
Advertisement
Table of Contents
