First Data FD150 User Manual page 13
Countertop and mobile terminals
Hide thumbs
Also See for FD150:
- Setup manual (3 pages) ,
- Quick setup manual (10 pages) ,
- Quick start manual
Table of Contents
Advertisement
13
Get to know your terminal
Switching the terminal on and off
To switch the terminal on:
>
Connect the power supply cable to the power
pack and plug it into the terminal.
>
Connect the telephone cable or Ethernet cable
and switch the terminal's power on at the wall.
>
Hold down the red X key until the screen
is formatting
>
When powered on, your terminal will display the
application main screen before returning to the
idle state.
Do not disconnect your terminal's power supply
or communication line unless instructed to do so
by the Help Desk. The terminal is now ready for
operation.
To switch the terminal off, hold down the red X key
until you are prompted with the power off option
on the screen.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FD150 and is the answer not in the manual?
Questions and answers
I need to know how to program the sales tax
To program the sales tax (GST) on a First Data FD150 terminal, you can configure the terminal to automatically calculate the GST on surcharge amounts. There is no detailed step-by-step process provided in the context, but it confirms that the terminal supports automatic GST calculation on surcharges. For setup, you may need to contact the helpdesk.
This answer is automatically generated
no host response 74