Sony DVP-NC85H Operating Instructions Manual page 70

• ' DOLBYDIGITAL(DVD VIDEO/DVD-VR
modeonly)
Selects the t_?e o1" D nlby Digital signal.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder. Yon can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
acliustlnents to the
"DOV_LNMIX" item in
"AUDIO SETUP" (page 69).
DOLBY
Select this when the player is
DIGITAL
connected to an audio
component with a built-in
Dolby Digital decoder.
If the HDMI OUT jack is connected to equipment
not compatible with DOLBY DIGITAL signals, the
"D-PCM" si_lals will be automatically output even
when you select "DOLBY DIGITAL"
• ' DIS
Select the type of DTS audio signals.
OFF
Select this when the player is
connected to an audio
component withont a built-in
DTS decoder.
ON Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
41,48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit
96kHz/24bit
The audio signals of DVD
VIDEOs are ahvays converted
to 48kHzi 16bit.
All types of signals including
96kHz 24bit are output in their
original format. However, if the
signal is enc_'pted for
cop?Tight protection purposes.
the signal is only outpm as
48kH_ 16bit.
• The analogue audio signals from the LINE OUT
LiR (AUDIO)jacks are not affected by this
setting and keep their original sampling fi-equency
level.
• If the HDMI OUT jack is connected to equipment
not compatible with 96 kHzi24 bit signals,
48 kHzi 16 bit PCM will be antomatically outpnt
even when you select "96kHz 24bit "
If file HDMI OUT jack is connected to equipment
not compatible with DTS signals, the"OFF" signals
will be antomatically output even when you select
"ON"
70