Sony DVP-NC80V Operating Instructions (DVPNC80V) Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. DVP-NC80V Operating Instructions (DVPNC80V)
  6. Operating instructions manual

Sony DVP-NC80V Operating Instructions (DVPNC80V) Operating Instructions Manual

Cd/dvd player
Hide thumbs Also See for DVP-NC80V Operating Instructions (DVPNC80V):
Table of Contents

Advertisement

Quick Links

2-591-934-11(1)
CD/DVD
Player
Operating Instructions
DVP-NC80V
© 2005 Sony Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVP-NC80V Operating Instructions (DVPNC80V) and is the answer not in the manual?

Questions and answers

Related Manuals for Sony DVP-NC80V Operating Instructions (DVPNC80V)

Summary of Contents for Sony DVP-NC80V Operating Instructions (DVPNC80V)

  • Page 1 2-591-934-11(1) CD/DVD Player Operating Instructions DVP-NC80V © 2005 Sony Corporation...

  • Page 2: Warning

    Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. DVP-NC80V Serial No.______________ Note This equipment has been tested...

  • Page 3: Important Safeguards

    Important Safeguards For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them. Power sources This set should be operated only from the type of power source...
  • Page 4 • Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. • Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Antennas Outdoor antenna grounding If an outdoor antenna or cable system is installed,...

  • Page 5: Precautions

    Make sure that “NO DISC” appears on the front panel display. Press ?/1 to turn off the player. The player enters standby mode. Disconnect the AC power cord. If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

  • Page 6: Table Of Contents

    Table of Contents WARNING ........... . 2 Notes About the Discs .

  • Page 7: About This Manual

    Enjoying MP3 Audio and JPEG Images ..... 53 About MP3 Audio Tracks and JPEG Image Files ..... 53 Playing MP3 Audio Tracks or JPEG Image Files.

  • Page 8: This Player Can Play The Following Discs

    This Player Can Play the Following Discs Format of discs DVD VIDEO DVD-RW/-R DVD+RW/+R Super Audio CD VIDEO CD/ Music CD CD-RW/-R “DVD+RW,” “DVD-RW,” “DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks. Note about CDs/DVDs The player can play CD-ROMs/CD-Rs/CD- RWs recorded in the following formats: –...
  • Page 9 Notes • Notes about DVD+RWs/DVD+Rs, DVD-RWs/ DVD-Rs or CD-Rs/CD-RWs Some DVD+RWs/DVD+Rs, DVD-RWs/DVD- Rs, or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized.

  • Page 10: Index To Parts And Controls

    Index to Parts and Controls For more information, see the pages indicated in parentheses. Front panel A [/1 (on/standby) button (26) B SUPER AUDIO CD indicator (31, 78) Lights up when: – playing an HD (High Density) layer of Super Audio CDs. –...

  • Page 11: Front Panel Display

    Front panel display When playing back a DVD VIDEO or DVD-VR mode disc Disc numbers (27) Disc type Current disc All Discs Repeat mode (35) Current audio signal (44) When playing back a VIDEO CD with Playback Control (PBC) (32) Disc numbers (27) Disc type Current disc...
  • Page 12 Remote A TV/DVD switch (41) OPEN/CLOSE button (27) C Number buttons (30) The number 5 button has a tactile dot.* D CLEAR button (33) E TOP MENU button (30) F C/X/x/c buttons (30) G O RETURN button (28) REPLAY/STEP/ ADVANCE/STEP buttons (27, 38) I ./>...

  • Page 13: Guide To The Control Menu Display

    Guide to the Control Menu Display Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows: Control Menu display 1 Control Menu display 2 (appears for certain discs only) Control Menu display off Control Menu display The Control Menu display 1 and 2 will show different items depending on the disc type.
  • Page 14 List of Control Menu items Item Item Name, Function DISC Selects the disc to be played. TITLE (page 38)/SCENE (page 38)/TRACK (page 38) Selects the title, scene or track to be played. CHAPTER (page 38)/INDEX (page 38) Selects the chapter or index to be played. TRACK (page 38) Selects the track to be played.
  • Page 15 DATE (page 56) Displays the date the picture was taken by a digital camera. INTERVAL (page 58) Specifies the duration for which the slides are displayed on the screen. EFFECT (page 58) Selects the effects to be used for changing slides during a slide show. MODE (MP3, JPEG) (page 57) Selects the data type;...

  • Page 16: Hookups

    Hookups Hooking Up the Player Follow steps 1 to 6 to hook up and adjust the settings of the player. Notes • Plug cords securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected. •...

  • Page 17: Step 3: Connecting The Video Cords

    Step 3: Connecting the Video Cords Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through C, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor, you must use pattern A.
  • Page 18 If you are connecting to a monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, P Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images.

  • Page 19: Using The Progressive Button

    Using the PROGRESSIVE button By using the PROGRESSIVE button on the front panel, you can select the signal format in which the player outputs video signals (Progressive or Interlace), and the conversion method for progressive signals. The PROGRESSIVE indicator lights up when the player outputs progressive signals.

  • Page 20: Step 4: Connecting The Audio Cords

    Step 4: Connecting the Audio Cords Select one of the following patterns A, monitor, projector, or AV amplifier (receiver). This will enable you to listen to sound. to LINE OUT L/R (AUDIO) to DIGITAL OUT (COAXIAL or OPTICAL) Optical digital cord (not supplied) to coaxial or optical digital input...
  • Page 21 A Connecting to audio L/R input jacks This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (supplied). Yellow White (L) Red (R) • Surround effect (page 46) TV: Dynamic Theater, Dynamic, Wide, Night Stereo amplifier (receiver): Standard, Night B Connecting to an AV amplifer...
  • Page 22 Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world- wide patents issued and pending.

  • Page 23: Step 5: Connecting The Power Cord

    Step 5: Connecting the Power Cord Plug the player and TV power cords into an AC outlet. Step 6: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press .. Turn on the TV.

  • Page 24: Center Speaker

    Press X/x to select the setting that matches your TV type. If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 67) If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode •...
  • Page 25 Press ENTER. “REAR” is selected. SPEAKER SETUP SIZE: DISTANCE: LEVEL(FRONT) : LEVEL(REAR) : TEST TONE: FRONT: LARGE(REAR) CENTER: LARGE(SIDE) LARGE(REAR) REAR: SUBWOOFER: Press X/x to select the size of the rear speakers. If no rear speaker is connected, select “NONE.” Press ENTER.

  • Page 26: Playing Discs

    Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. Turn on your TV. Press [/1. The player turns on. Switch the input selector on your TV so that the signal from the player appears on the TV screen.

  • Page 27: Additional Operations

    Additional operations DISC 1-5 CLEAR REPLAY ZOOM SLOW PLAY Operation Select a disc Press DISC 1–5 on the player Stop Press x Press X Pause Press X or H Resume play after pause Go to the next disc Press DISC SKIP Press >...

  • Page 28: Replacing Discs While Playing A Disc (Exchange)

    Replacing discs while playing a disc (EXCHANGE) You can open the disc tray while playing a disc so that you can check which discs are to be played next and replace discs without interrupting playback of the current disc. Press EXCHANGE. The disc tray opens and two disc compartments appear.

  • Page 29: Stop Playback

    Resuming Playback From the Point Where You Stopped the Disc Resume) The player stores the point where you stopped the disc for up to 40 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the 41st disc, the resume playback point for the first disc is deleted.

  • Page 30: Using The Dvd's Menu

    Using the DVD’s Menu A DVD is divided into long sections of a picture or a music feature called “titles.” When you play a DVD which contains several titles, you can select the title you want using the TOP MENU button. When you play DVDs that allow you to select items such as language for the sound and subtitles, select these items using the MENU...

  • Page 31: Selecting A Playback Area For A Super Audio Cd

    Selecting a Playback Area for a Super Audio SA-CD MULTI/2CH Selecting a playback area on a 2 channel + Multi-channel Super Audio CD Some Super Audio CDs consist of a 2 channel playback area and a multi-channel playback area. You can select the playback area you want to listen to.

  • Page 32: Playing Video Cds With Pbc Functions (Pbc Playback)

    Playing VIDEO CDs With PBC Functions PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen. Number buttons RETURN Start playing a VIDEO CD with PBC functions. The menu for your selection appears. Press the number buttons to select the item number you want.

  • Page 33: Creating Your Own Program

    Various Play Mode Functions (Program Play, Shuffle Play, Repeat Play, A-B Repeat Play) You can set the following play modes: • Program Play (page 33) • Shuffle Play (page 34) • Repeat Play (page 35) • A-B Repeat Play (page 36) •...

  • Page 34: Playing In Random Order (Shuffle)

    Next, press X/x to select “03” under “C,” then press ENTER. PROGRAM ALL CLEAR 1. TITLE 0 2 – 0 3 2. TITLE – – 3. TITLE – – 4. TITLE – – 5. TITLE – – 6. TITLE – – 7.

  • Page 35: Playing Repeatedly (Repeat Play)

    Press SHUFFLE during playback. The following display appears. TITLE Press SHUFFLE repeatedly to select the item to be shuffled. When playing a DVD VIDEO • TITLE • CHAPTER When playing a VIDEO CD, Super Audio CD or CD • TRACK When Program Play is activated •...

  • Page 36: Repeating A Specific Portion (A- B Repeat Play)

    • ALBUM: repeats the current album. • TRACK (MP3 audio tracks only): repeats the current track. When Program Play or Shuffle Play is activated • ON: repeats Program Play or Shuffle Play. To return to normal play Press CLEAR, or select “OFF” in step 2. z Hint You can set Repeat Play while the player is stopped.

  • Page 37: Searching For A Scene

    Searching for a Scene Searching for a Particular Point on a Disc (Search, Scan, Slow-motion Play, Freeze Frame) You can quickly locate a particular point on a disc by monitoring the picture or playing back slowly. STEP Notes • Depending on the disc, you may not be able to do some of the operations described.

  • Page 38: Watching Frame By Frame (Slow-Motion Play)

    Watching frame by frame (Slow-motion Play) m or M Press in pause mode. To return to normal speed, press H. Each time you press during Slow-motion Play, the playback speed changes. Two speeds are available. With each press the indication changes as follows: Playback direction Opposite direction (DVD/DVD-VR mode only)
  • Page 39 When playing a DVD VIDEO/DVD-VR mode disc TITLE CHAPTER TIME/TEXT Select “TIME/TEXT” to search for a starting point by inputting the time code. When playing a VIDEO CD or Super VCD without PBC Playback TRACK INDEX When playing a VIDEO CD or Super VCD with PBC Playback SCENE When playing a Super Audio CD/CD...

  • Page 40: Searching By Scene (Picture Navigation)

    Searching by Scene (PICTURE NAVIGATION) You can divide the screen into 9 subscreens and find the desired scene quickly. RETURN Press PICTURE NAVI during playback. The following display appears. CHAPTER VIEWER Press PICTURE NAVI repeatedly to select an item. • CHAPTER VIEWER (DVD VIDEO only): displays the first scene of each chapter.

  • Page 41: Viewing Information About The Disc

    Viewing Information About the Disc Checking the Playing Time and Remaining Time You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/Super Audio CD/CD text or track name (MP3 audio) recorded on the disc.
  • Page 42 Checking the play information of the disc To check the DVD/Super Audio CD/CD text Press TIME/TEXT repeatedly in step 2 to display text recorded on the DVD/Super Audio CD/CD. The DVD/Super Audio CD/CD text appears only when text is recorded in the disc. You cannot change the text.
  • Page 43 When playing a VIDEO CD (without PBC functions), Super Audio CD or CD Track playing time and current disc track number Remaining time of the current track* Playing time of the current disc Remaining time of the disc Text Current disc, track* and index number* (returns to top automatically) When playing a Super Audio CD, the current...

  • Page 44: Sound Adjustments

    Sound Adjustments Changing the Sound When playing a DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language.

  • Page 45: Surround Mode Settings

    Checking the audio signal format You can check the audio signal format by pressing AUDIO repeatedly during playback. The format of the current audio signal (Dolby Digital, DTS, PCM, etc.) appears as shown below. Example: Dolby Digital 5.1 ch LFE (Low Frequency Effect) Rear (L/R) 1 : ENGLISH DOLBY DIGITAL...
  • Page 46 (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV.
  • Page 47 For 4 to 6 speaker setups You can enjoy the following surround effects by using the 2 front speakers and 2 rear speakers. Connect the player to the amplifier (receiver) with the connection (page 20). You can experience Dolby Surround (Pro Logic) sounds or Digital Cinema Sound (DCS).
  • Page 48 VIRTUAL MULTI DIMENSION Creates an array of virtual rear speaker positions higher than the listener from a single set of actual rear speakers. This mode creates five sets of virtual speakers surrounding the listener at approximately a 30 angle of elevation. The effect differs according to “REAR”...

  • Page 49: Enjoying Movies

    Enjoying Movies Changing the Angles If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “ appears in the front panel display. This means that you can change the viewing angle. Press ANGLE during playback. The number of the angle appears on the display.

  • Page 50: Adjusting The Playback Picture (Custom Picture Mode)

    Adjusting the Playback Picture (CUSTOM PICTURE MODE) You can adjust the video signal of the DVD, VIDEO CD or DATA CD/DATA DVD in JPEG format from the player to obtain the picture quality you want. Choose the setting that best suits the program you are watching. When you select “MEMORY,”...

  • Page 51: Sharpening The Pictures (Sharpness)

    Adjusting the picture items in “MEMORY” You can adjust each element of the picture individually. • PICTURE: changes the contrast • BRIGHTNESS: changes the overall brightness • COLOR: makes the colors deeper or lighter • HUE: changes the color balance In step 3 of “Adjusting the Playback Picture,”...

  • Page 52: Adjusting The Delay Between The Picture And Sound (Av Sync)

    Adjusting the Delay Between the Picture and Sound (AV SYNC) When the sound does not match the pictures on the screen, you can adjust the delay between the picture and sound. CLEAR Press DISPLAY during playback. The Control Menu appears. Press X/x to select SYNC), then press ENTER.

  • Page 53: Enjoying Mp3 Audio And Jpeg Images

    Enjoying MP3 Audio and JPEG Images About MP3 Audio Tracks and JPEG Image Files MP3 is audio compression technology that satisfies the ISO/IEC MPEG regulations. JPEG is image compression technology. You can play DATA CDs/DATA DVDs that contain MP3 audio tracks or JPEG image files.

  • Page 54: Playing Mp3 Audio Tracks Or Jpeg Image Files

    When you insert a DATA CD/DATA DVD and press H, the numbered tracks (or files) are played sequentially, from 1 through 7. Any sub-albums/tracks (or files) contained within a currently selected album take priority over the next album in the same tree. (Example: C contains D so 4 is played before 5.) When you press MENU and the list of album...
  • Page 55 Selecting an album Press MENU. The list of albums on the disc appears. When an album is being played, its title is shaded. 3 ( 3 0 ) R O C K B E S T H I T K A R A O K E M Y F A V O U R I T E S O N G R &...

  • Page 56: Selecting A Jpeg Image File

    Selecting a JPEG image file After step 2 of “Selecting an album,” press PICTURE NAVI. The image files in the album appear in 16 subscreens. A scroll box is displayed on the right. To display the additional image, select the bottom images and press x. To return to the previous image, select the top images and press X.

  • Page 57: Enjoying Jpeg Images As A Slide Show

    Enjoying JPEG Images as a Slide Show You can play JPEG image files on a DATA CD or DATA DVD successively as a slide show. Press MENU. The list of albums on the DATA CD/ DATA DVD appears. 3 ( 3 0 ) R O C K B E S T H I T K A R A O K E M Y F A V O U R I T E S O N G...

  • Page 58: Setting The Pace For A Slide Show

    z Hints • To repeat both MP3 audio tracks and JPEG image files in a single album, repeat the same MP3 audio track or album when “MODE (MP3, JPEG)” is set to “AUTO.” See “Playing repeatedly (Repeat Play)” (page 35) to repeat the track or album. •...

  • Page 59: Using Various Additional Functions

    Using Various Additional Functions Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) You can set two kinds of playback restrictions for a disc. • Custom Parental Control You can set playback restrictions so that the player will not play inappropriate discs. •...
  • Page 60 To turn off the Custom Parental Control function Follow steps 1 to 3 of “Custom Parental Control.” Press X/x to select “OFF t,” then press ENTER. Enter your 4-digit password using the number buttons, then press ENTER. To play a disc for which Custom Parental Control is set Insert the disc for which Custom Parental Control is set.
  • Page 61 Enter or re-enter your 4-digit password using the number buttons, then press ENTER. The display for setting the playback limitation level appears. PARENTAL CONTROL LEVEL: STANDARD: Press X/x to select “STANDARD,” then press ENTER. The selection items for “STANDARD” are displayed. PARENTAL CONTROL LEVEL: STANDARD:...

  • Page 62: Controlling Your Tv Or Av Amplifier (Receiver) With The Supplied Remote

    Changing the password Press DISPLAY while the player is in stop mode. The Control Menu appears. Press X/x to select (PARENTAL CONTROL), then press ENTER. The options for “PARENTAL CONTROL” appear. Press X/x to select “PASSWORD t,” then press ENTER. The display for entering the password appears.
  • Page 63 Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Code number Sony 01 (default) Akai Centurion Coronado Curtis-Mathes...

  • Page 64: Controlling The Volume Of Your Av Amplifier (Receiver) With The Remote

    If more than one code number is listed, try entering them one at a time until you find the one that works with your AV amplifier (receiver). Manufacturer Code number Sony 78, 79, 80, 91 Denon 84, 85, 86 Kenwood 92, 93...

  • Page 65: Settings And Adjustments

    Settings and Adjustments Using the Setup Display By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from 66 to 70.

  • Page 66: Setting The Display Or Sound Track Language (Language Setup)

    Press X/x to select a setting, then press ENTER. The setting is selected and setup is complete. Example: “4:3 PAN SCAN” SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: BLACK LEVEL : BLACK LEVEL (COMPONENT OUT) 4:3 OUTPUT: To enter the Quick Setup mode Select “QUICK”...

  • Page 67: Settings For The Display (Screen Setup)

    Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 65). The default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND:...

  • Page 68: Custom Settings (Custom Setup)

    BLACK LEVEL (COMPONENT OUT) Selects the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select this when the player outputs progressive signals (page 19). Sets the black level of the output signal to the standard level.

  • Page 69: Settings For The Sound (Audio Setup)

    PAUSE MODE (DVD VIDEO/DVD-VR mode only) Selects the picture in pause mode. AUTO The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. FRAME The picture, including subjects that do not move dynamically, is output in high resolution. TRACK SELECTION (DVD VIDEO only) Gives the sound track which contains the highest number of channels priority when you...

  • Page 70: Setting The Digital Output Signal

    AUDIO FILTER Selects the digital filter to reduce noise above 22.05 kHz (Sampling frequency (Fs) of the audio source is 44.1 kHz), 24 kHz (Fs is 48 kHz), or 48 kHz (Fs is above 96 kHz). SHARP Provides a wide frequency range and spatial feeling.

  • Page 71: Settings For The Speakers (Speaker Setup)

    48kHz/96kHz PCM (DVD VIDEO only) Selects the sampling frequency of the audio signal. 48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit. 96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as...
  • Page 72 • REAR LARGE (REAR/SIDE): Normally select this position. Select according to the rear speaker position*. SMALL (REAR/SIDE): Select this when the sound distorts or the surround effects are difficult to hear. Select according to the rear speaker position*. NONE Select this if you do not connect rear speakers.

  • Page 73: Adjusting The Speaker Volume

    REAR Set this within –16 and (10 ft/3m) +2 ft (–4.8m and +0.6m) of the “FRONT” setting in 1 ft (0.3m) increments. For example, if “FRONT” is set to 17 ft (5.1m), “REAR” can be set between 1 and 19 ft (0.3m and 5.7m). Note If each of the front or rear speakers are not placed at an equal distance from your listening position, set...

  • Page 74: Additional Information

    Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. , Check that the power cord is connected securely.

  • Page 75: Operation

    The surround effect is difficult to hear when you are playing a Dolby Digital, or DTS sound track. , Check the speaker connections and setting (page 20, 23, 70). , The 5.1 channel sound is not recorded on the disc being played. The sound comes from the center speaker only.
  • Page 76 , Child Lock is set (page 28). The disc tray does not open and “TRAY LOCKED” appears on the front panel display. , Contact your Sony dealer or local authorized Sony service facility. “Data error” appears on the TV screen when playing a DATA CD/DATA DVD.

  • Page 77: Self-Diagnosis Function (When Letters/Numbers Appear In The Display)

    E XX To prevent a malfunction, the (xx is a number) player has performed the self-diagnosis function. , Contact your nearest Sony dealer or local authorized Sony service facility and give the 5- character service number. Example: E 61 10 Glossary...
  • Page 78 9.4 GB, and double-layer and double-sided DVD is 17 GB. The picture data uses the MPEG 2 format, a worldwide standard of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture.
  • Page 79 • Super Audio CD (dual layer disc) This disc consists of dual HD layers and is capable of extended play over long periods. Also, as the dual layer disc consists of dual HD layers on one side only, you do not have to turn the disc over during playback.

  • Page 80: Specifications

    Operating humidity: 25 % to 80 % Supplied accessories See page 16. Specifications and design are subject to change without notice. NERGY As an Corporation has determined that this product meets the energy efficiency. is a U.S. registered mark. NERGY Partner, Sony NERGY guidelines for...

  • Page 81: Language Code List

    Language Code List For details, see pages 44, 49, 66. The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language 1027 Afar 1183 Irish 1028 Abkhazian 1186 Scots Gaelic 1032 Afrikaans 1194 Galician 1039 Amharic 1196 Guarani 1044 Arabic 1203 Gujarati...

  • Page 82: Index

    Index Numerics 16:9 67 4:3 LETTER BOX 67 4:3 PAN SCAN 67 48kHz/96kHz PCM 71 5.1 Channel Surround 45 A-B REPEAT 36 ADVANCE 27 ALBUM 39 Album 53 ANGLE 49 AUDIO 44 AUDIO ATT 69 AUDIO DRC 69 AUDIO FILTER 70 AUDIO SETUP 69 AUTO PLAY 68 AUTO POWER OFF 68...
  • Page 83 TEST TONE 73 TIME/TEXT 39 TITLE 39 Title 79 TITLE VIEWER 40 TOP MENU 30 TRACK 39 Track 11 TRACK SELECTION 69 TRACK VIEWER 40 Troubleshooting 74 TV TYPE 67 TVS 45 Usable discs 8 Video based software 78 VIDEO CD 7 ZOOM 27...
  • Page 84 Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Sony Corporation Printed in Malaysia...

This manual is also suitable for:

Dvp-nc80v/b operating instructions (dvpnc80v)Dvp-nc80v/s operating instructions (dvpnc80v)

Table of Contents