Sony DVP-NC85H Operating Instructions Manual page 23

0 Connecting to audio LIR input
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound. Connect using the audio video cord
(supplied).
• Surround effect (page 45)
TV: Dynamic Theater, Dynamic, Wide,
Night
0 Connecting to a digital audio
inputjack
If yonr AV amplifier (receiver) has a Dolby
• [ "_ . .
Digital* or DTS *" decoder and a digital
input jack, use this connection•
Connect using a coaxial or optical digital
cord,HDMI cord (not supplied)•
Coaxial cord
Optical cord @
HDMI cord _
• Surround effect
Dolby Digital (5. lch), DTS (5. lch)
o
Stereo amplifier (receiver): Standard, Night
*1 Manut:actured tinder license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
,2 "DTS" and "DTS Digital Out" are trademarks of
Digital Thea!er Systems, Inc.
I_I_I
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "ON" in Quick Setup
(page 24)
• When you connect an amplifier (receiver) that
contbrms to the 96 kHz sampling frequency, set
"48kHy/96kHz PCM" in "AUDIO SETUP" to
"96kHz'24biF' (page 70)
• The TVS effects of this player cannot be used
with this connection.
• When you connect the player to an AV amplifier
(receiver) using an HDMI cord, you will need to
do one of the following:
Connect the AV amplifier (receiver) to the TV
with the HDMI cord•
Connect the player to the TV with a video cord
other than HDMI cord (component video cord, S
VIDEO cord, or audio:video cord)•
• When connecting to the HDMI OUT jack,
carefillly align the HDMI connector with the jack
Do not bend and apply pressure to the HDMI
cord•
,-i_continued _3