Advertisement
ENGLISH
CD PLAYER DISPLAY
On this system,
the receiver
includes
a multi-display.
This display indicates various types of information for different modes depending on which section of the system is being used, as
follows:
When listening to the radio or when using the timer .......0.--.eeeeecreeeees
See diagram below.
When listening toaCbD
...,
... Refer to Page 9.
When listening to a tape
.. Refer to Page 10.
Tape type and re-
maining time dis-
play
During the editing
function,
c-00
lights
and
the
tape
time
is dis-
played.
These
indicate the time display
mode.
TOTAL lights when the remaining time for
all tracks is displayed.
SINGLE fights when the remaining time
per track is displayed.
This
lights
to
indi-
cate that the timer is
set.
When a disc is loaded:
e The total number
of tracks
is displayed
in the stop mode.
e The track number
is displayed
in the play and
program
modes.
manual
search
mode.
e@ The timer standby mark " iC) " will not light if the
current time is not set.
This
lights
when
signals
are received
from
the re-
mote
contro!
unit.
Time
display
O0ODis
displayed
when
the disc data cannot
be read properly.
When a disc is loaded:
e
The elapsed
playing
time is displayed
in the stop mode.
e The elapsed time for the track currently playing is displayed in the play and pause modes.
e
The elapsed time for the programmed
tracks is displayed
in the program
mode.
The
reception
frequency,
function, time, and timer set-
tings are displayed
here.
This indicates the band being
received [AM (MW and LW) or
FM]
and
the preset
number
when
presetting
stations
in
the memory.
(REPEAT AB!
PROGRAM
lights
during
the prog-
rammed
= search
mode.
This lights when
the
station
is
tuned
in
properly.
> PLAY lights when the disc is
playing,
and
i! PAUSE
lights
when
in the pause
mode.
When
presetting
stations in the memory
: "MEMORY"
When
setting the timer times
: "ON"
or "OFF"
When recalling a preset station : Preset number
When
the sleep timer is operating
: "SLEEP"
When an equalizer setting is selected : Equalizer mode
During
muting
: "MUTING"
*
Normally
the equalizer setting is displayed.
The
indicators
switch
as
follows
when the REPEAT button is pressed
in the play mode:
First press
: REPEAT
TRACK
Second
press : REPEAT
ALL
Third press
: REPEAT
Fourth press
: REPEAT {A)-(B)
Fifth press
: None Display
During editing operations: "REMAIN"
During edited
recording:
"EDIT"
When
no disc is loaded, when the disc is loaded
upside-down, or when the disc is heavily scratched or
dirty : "NO OISC"
remaining
time for side A of the tape is indicated
in the same
way.
The
> PLAY indicator lights when a disc is playing, and the Il PAUSE
indicator
lights when the pause mode is set.
Advertisement
