Advertisement
ANTENNA
CONNECTIONS
Installing the AM
Loop Antenna
Tune in an AM station {refer to Page 12), listen to the
sound, then install the antenna in a position as far from
the set as possible in which
distortion and noise are
minimum, in some cases it is better to connect with the
polarities inverted. Good reception of AM stations is not
possible if the loop antenna is not connected or if it is
touching
metal
objects.
Refer to Page 5 for in-
structions
on
connect-
ing the antenna termin-
ANTENNA
Connect the antenna to the FM terminals (refer to page
12), tune in an FM broadcast, then move the antenna to
find
a
position
in which
distortion
and
noise
are
minimum.
Secure
the
ends
of the antenna
in that
position
using tape, tacks, etc.
Loop antenna
FM indoor Antenna
(An accessory)
FM
antenna
75 ohms coaxial cable
(3C-2V or 5C-2V)
CAUTION
Use an outdoor antenna
if reception is not good with
the included antenna. Change the location, height, and
direction
of the antenna
to find the position
where
reception is best, then fix the antenna in that position.
Connect the outdoor antenna using a 75 ohms coaxial
cable. This protects against external
noise.
Places for Installing Outdoor Antennas
@
Install
the
outdoor
antenna
facing
a
broadcast
station's transmission
antenna.
When surrounded by buildings or hills, try changing
the direction to obtain optimum
reception.
®
Do not install the antenna
under
power
lines.
It is extremely dangerous for the antenna to come
into contact
with a power
line.
e
install away
from
roads or train tracks to prevent
noise from cars and trains.
¢
Do not install the antenna too high, as it may be hit
by lightening.
INSTALLING
THE SETS
[Stacking]
CAUTION:
Set the receiver (UDRA-60) on the top.
(i-Speaker)
{Receiver}
Cassette Deck
[Installing Side by Side]
(L-Speaker)
[Partial Stacking]
{Receiver}
(CD Player)
CAUTION:
Set the receiver (UDRA-60) on
(i-Speaker)
{Receiver}
{R-Speaker}
(CD Player)
(R-Speakert
Cassette Deck
the top.
(R-Speaker)
{CD Player)
CAUTION:
Do not plug the power cord into the power outlet until
diagram.
This system includes digital circuitry, so it may cause
switch
off.
Advertisement
