Advertisement
Using the MS (Music Search) Function
e@ in the
rewind
direction,
playback
starts
from
the
beginning of the seiection which is currently piaying,
and in the fast-forward direction, playback starts from
the beginning
of the following selection.
For the normal
fast-forward
or rewind
operations,
press the I stop button before pressing the PP or 44
button.
The tape skips by a number of selections equai to the
number
of times the DP or €4€ button is pressed.
For example:
[rs cael
PLAY D> DD D>
Press D or 4
Press DP or 44
[=
Dispiay During the Music Search Operation
During the music search operation, the number of selections being skipped is indicated
on the tape counter, and this number
decreases each time a blank section is detected (for example,
3 + 2 — 1).
e When
skipping ahead
to a following selection
P OS
Number of tracks
to be skipped
@ When
skipping back to a previous
selection
——Number
of tracks
P
ae
0
to be skipped
This lights when skipping backwards
[7] CONVENIENT
FUNCTIONS
SDB: Use this made to create a more powerful bass
sound.
FLAT: Use this mode for straight, pure sound.
Use this mode for strongly modulated sound.
Use this mode to create glossy vocals.
DISCO:
VOCAL:
ROCK:
Use this mode for powerful sound.
BGM:
Use this mode for easy listening.
f2] USING THE TIMER
WB Notes on Setting the Timer
e@ Always set the current time beforehand.
®
Besure to preset radio stations before setting the timer.
(Refer to "Presetting AM and FM Stations" on Page 12.)
e Turn the standby switch off when not using the timer.
@ Types of Timers:
TIMER:
This can be used to turn the power on
and off at the same
time each day.
("Good morning music")
SLEEP TIMER:
This can be used to set the power to turn
off in intervals of 10 minutes between 60
and 10 minutes, using the remote con-
trol unit.
("Good night music")
{f there should be a power failure or if the power cord should
be unplugged from the power outlet, "00:00" or the time at
which the power
failed flashes on the time display. If this
happens,
reset the current time.
(Reset the current time and timer settings.)
Checking the Timer Settings
To check the timer settings, turn the receiver's power on then
press the timer button. Next, press the ENTER/NEXT
button
repeatedly
to dispiay
the following:
Timer
start
mode
—
reception band, preset channel number and timer on time —
timer off time.
Press the ENTER/NEXT
button
once again to return to the
frequency display.
If the timer on or off times are not set, "00:00" flashes and the
display does
not switch
to the next step.
Changing the Timer Settings
When
timer setting operations
are repeated, the old timer
settings are cleared
and the new
ones
are set.
Clearing the Timer Settings
Press the TIMER key once, then press it again while "FU AC" is
displayed to clear the timer settings.
Cautions on Setting the Timer
The timer settings are given priority, so when the timer on
time is reached, the function switches to that function set for
the timer.
19
Advertisement
