Woods BS48.20 Operator's Manual page 11

BSXX.30 Models
SLEEVE FOR
CATEGORY 1
QUICK HITCH
(CATEGORY 1
QUICK HITCH
SLEEVE)
Figure 3. BSXX.30 Models
1. Attach tractor's lower 3-point arms to scraper lower
hitch pin (8) and secure in place with klik pin (18).
2. Attach tractor top link to upper holes in mast plates
using tractor heavy-duty top link pin. Secure with re-
taining pin supplied with tractor top link.
3. When using a Quick Hitch, install sleeve (6) on
lower pins and secure with klik pin.
4. Quick Hitch attaches to lower hitch pin sleeves and
sleeve between mast plates.
BSXX.40 Models
CAT 2
CLEVIS
CAT 1
CLEVIS
SLEEVE FOR CAT 1
AND 2 QUICK HITCH
(SLEEVE FOR CAT 1
AND 2 QUICK HITCH )
Figure 4. BSXX.40 Models
Category 1 Three Point Hitch
1. Attach tractor's lower 3-point arms to scraper lower
hitch pin (10) in the inner clevis of hitch bracket.
Secure in place with klik pin (18).
2. Attach tractor top link to upper holes in mast plates
using tractor heavy-duty top link pin. Secure with re-
taining pin supplied with tractor top link.
MAN1377
( 02/29/2024 )
MAN1377_2024-02.indd 11 MAN1377_2024-02.indd 11
CATEGORY 1
TOP LINK
CONNECTION
18
8
6
9 (SLEEVE FOR
CAT 2 TOP LINK)
CAT 1 TOP LINK
CONNECTION
19
10
6 7
(SLEEVE FOR
CAT 2 LOWER LINK)
3. When using a Category 1 Quick Hitch, install sleeve
(6) on inner clevis of lower hitch bracket and secure
with klik pin.
4. Quick Hitch attaches to lower hitch pin sleeves and
sleeve between mast plates.
Category 2 Three Point Hitch
1. Attach tractor's lower 3-point arms to sleeve (7) and
scraper lower hitch pin (10) in the outer clevis of
hitch bracket. Secure in place with klik pin (18).
2. Attach tractor top link to sleeve (9) and upper holes
in mast plates using tractor heavy-duty top link pin.
Secure with retaining pin supplied with tractor top
link.
CD9401
3. When using a Category 2 Quick Hitch, install sleeve
(6) on outer clevis of lower hitch bracket and secure
with klik pin.
4. Quick Hitch attaches to lower hitch pin sleeves and
sleeve between mast plates.
Quick Hitch Connection
■ The 20 mm bolt and sleeve in the lower hole
provide the attachment point for a Category 1
or 2 quick coupler. Do not remove this bolt and
sleeve when operating the scraper.
For Category 1 quick hitch application, place hitch
sleeves over mounting pin.
Align quick hitch with 3-point mount pins and top spac-
er sleeve between the right and left mast plates.
For Category 2 quick hitch, make sure sleeves are in
outer clevis position on lower 3-point pins.
The top quick hitch hook will seat into spacer sleeve.
This sleeve does not interfere when unit is used with a
standard 3-point hitch.
CD9402
Figure 5. Top Quick Hitch Hook Connection
NOTICE
Operation 11
2/29/24 9:00 AM 2/29/24 9:00 AM