Product Installation; Install Your Indoor Unit 1 - Midea MSMF-10CRN8 User Manual

Install You Indoor Unit
1 Select installation location
: PRIOR TO INSTALLATION
NOTE
Before installing the indoor unit, refer to the label on the product box to make sure that the
model number of the indoor unit matches the model number of the outdoor unit.
The following are standards that will help you choose an appropriate location for the unit.
Proper installation locations meet the following standards:
Good air circulation


Firm and solid—the location will not vibrate
 Strong enough to support the weight of the
unit
DO NOT install unit in the following locations:
Near any source of heat, steam, or
combustible gas
Near flammable items such as curtains or
clothing
NOTE: FOR PRODUCT INSTALLATION
If there is no fixed refrigerant piping:
While choosing a location, be aware that you should leave ample room for a wall hole (see
Drill wall hole for connective piping step) for the signal cable and refrigerant piping that
connect the indoor and outdoor units. The default position for all piping is the right side of
the indoor unit (while facing the unit). However, the unit can accommodate piping to both
the left and right.
Convenient drainage


A location at least one meter from all other
electrical devices (e.g., TV, radio, computer)
10
Noise from the unit will not

disturb other people.
Near any obstacle that might block air
circulation
Near the doorway
In a location subject to direct sunlight