❷ Introduction To The Projector; Features You'll Enjoy - NEC PE523X User Manual

❷ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.

Features you'll enjoy:

• Quick start (6 seconds*
6 seconds* after turning on the power, the projector is ready to display PC or video images.
1
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even
when projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
* The quick start time is only when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen mes-
1
sage.
• 0.14 W (100-130 V AC)/0.17 W (200-240 V AC) in standby condition with energy saving technology
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that
consumes only 0.14 W (100-130 V AC)/0.17 W (200-240 V AC).
• Carbon Meter
This feature will show energy-saving effect in terms of CO
MODE] is set to [AUTO ECO], [NORMAL], or [ECO].
The amount of CO
2
and in the INFO of the on-screen menu.
• Lamp life up to 8000 hours
Using in Eco Mode (ECO) allows you to prolong the projector's lamp life up to 8000 hours (up to 4000 hours in
ECO MODE OFF).
• Wide range of input terminals (HDMI × 2, HDBaseT, etc.)
The projector is equipped with a variety of input terminals: HDMI (× 2), Computer (analog), Video, HDBaseT, etc.
HDMI input terminal on this product supports HDCP. HDBaseT is a connection standard for home appliances
that is established by the HDBaseT Alliance.
• Integrated RJ-45 terminal for wired networking capability along with wireless networking capabilities
An RJ-45 terminal is standard. An optional USB Wireless LAN Unit is required for wireless LAN connection.
• 20 W built-in speaker for an integrated audio solution
Powerful 20 watt monaural speaker provides volume need for large rooms.
• The supplied remote control allows you to assign a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by as-
signing an ID number to each projector.
• Convenient utility software (User Supportware)
This projector supports our utility software (NaViSet Administrator 2, Virtual Remote Tool, etc.) NaViSet Adminis-
trator 2 helps you control the projector by a computer via wired LAN connection. Virtual Remote Tool helps you
perform operations by a virtual remote control such as projector's power on or off and signal selection via wired
LAN connection. Moreover, it has function to send an image to the projector and register it as the logo data.
Please visit our web site for downloading each software.
URL: http://www.nec-display.com/dl/en/index.html
), Quick Power Off, Direct Power Off
1
emission reduction will be displayed in the confirmation message at the time of power-off
emission reduction (kg) when the projector's [ECO
2
2
1. Introduction