NEC PE523X User Manual page 115

TIP:
• With the projector's HDBaseT port, remote control is not available when the projector is in the standby mode (serial communications is not
available). (Remote control becomes available when the projector's power is on). The method below can be used to turn on the projector's
power when it is in standby mode.
The projector can be operated by connecting the computer and projector to the network (on the projector, using the LAN port with [STANDBY
MODE] set to [NETWORK STANDBY]).
Computer (for projector control)
Switching hub, etc.
6. Installation and Connections
Example of a transmitter
DC IN
HDBaseT
Video device with HDMI output
HDBaseT
104
Computer (for output)