Table of Contents
Advertisement
Note:
The retainers at the front differ from those at the rear.
Hook the front retainers with the hook into the round
1.
hole at the top and set them at a slight angle
Hook the front retainers in at the bottom and
2.
straighten them
.
Troubleshooting
24 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 33
24.1 Malfunctions
Fault
The appliance is not
working.
Cause and troubleshooting
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
▶
Hook the rear retainers with the hook into the top
3.
hole
and push them into the bottom hole
23.3 Attaching the rails
.
Set the rear rail at an angle, hooking it into the re-
1.
tainers at the top and bottom
Pull the rail forwards
2.
Hook in the rail at the front
3.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
Troubleshooting en
.
.
.
and press it down
.
31
Advertisement
Table of Contents
