Siemens BE932 1 1 Series User Manual And Installation Instructions page 19

Hide thumbs Also See for BE932 1 1 Series:
Table of Contents

Advertisement

WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
→ "Customer Service", Page 20
17.1 Malfunctions
Fault
The appliance is not
working.
Microwave not work-
ing.
Food does not heat
up.
The interior lighting is
not working.
Microwave mode is
cancelled.
Food takes longer
than usual to heat up.
Time not displayed
when appliance
switched off
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
Malfunction
Switch off the fuse in the fuse box.
1.
Switch the fuse back on after approx. 10 seconds.
2.
a If the fault was a one-off, the message disappears.
If the message appears again, call the after-sales service. Please specify the exact error
3.
message when calling.
→ "Customer Service", Page 20
Door is not fully closed.
Check whether food remains or foreign material are trapped in the door.
Demo mode is activated in the basic settings.
Disconnect the appliance from power supply by briefly switching off the circuit breaker in
1.
the fuse box.
Go to the basic settings and deactivate Demo mode within the next 5 minutes.
2.
→ Page 16
Different causes are possible.
Call
→ "Customer Service", Page 20.
Malfunction
reset the appliance
1.
Press and hold  
Or switch off the fuse in the fuse box. Switch the fuse back on after approx.
10 seconds.
a If the fault was a one-off, the message disappears.
2.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→ "Customer Service", Page 20
The microwave power setting is set too low.
Set a higher microwave power setting.
A larger amount than usual has been placed in the appliance.
Set a longer cooking time.
You need double the time when you have double the amount.
The food is colder than usual.
Turn or stir the food from time to time during cooking.
Display switches itself off after a short time.
No action required.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord or the appliance power cable of
this appliance is damaged, it must be replaced with
a special power cord or special appliance power
cable, which is available from the manufacturer or
its Customer Service.
button for at least 10 seconds.
Troubleshooting en
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Be732 1 1 seriesBe732r1b1Be732l1b1

Table of Contents