Table of Contents
Advertisement
For operating modes that always require a cooking
time, the appliance resets the cooking time to the
preset value.
Press "Apply".
3.
12.2 Setting the end time
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Notes
¡ To achieve good cooking results, do not delay the
time once the operation has already started.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ An operating mode and level have been set.
¡ A cooking time has been set.
Press "End".
1.
Use
or
to delay the time.
2.
If required, use
to reset the setting value.
Press
.
3.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a When the cooking time has elapsed, a signal
sounds. A message appears on the display confirm-
ing that the operation has finished.
Once the cooking time has elapsed, perform one of
4.
the following actions:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
Press the end time.
1.
Use
or
to change the time.
2.
Press "Apply".
3.
Cancelling the end time
You can delete the set time at any time.
Childproof lock
13 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
13.1 Activating the childproof lock
Press and hold
for approx. 4 seconds.
▶
a The control elements are locked.
to switch the ap-
Press the end time.
1.
Use
2.
Press "Apply".
3.
12.3 Setting the timer
You can set the time on the timer. Once this time has
elapsed, a signal tone sounds. You can set a maximum
time on the timer of 24 hours. The function works inde-
pendently of the operation and other time-setting op-
tions. The timer signal is different from other signals.
Press
.
1.
a The minutes flash.
2.
Use
and
to set the minutes.
To set the hours, press the hours.
3.
Use
and
to set the hours.
4.
5.
To set the seconds, press the seconds.
Use
and
to set the seconds.
6.
Press "Start".
7.
a The timer starts.
a On some displays, the timer continues to count
down in the background. Press
timer.
Ending the timer
Requirement: A signal sounds.
Press any field.
▶
a The timer is switched off.
Changing the timer
Press
.
1.
Press "Stop".
2.
a The minutes flash.
Use
and
to set the minutes.
3.
To set the hours, press the hours.
4.
Use
and
to set the hours.
5.
To set the seconds, press the seconds.
6.
Use
and
to set the seconds.
7.
Press "Start".
8.
Cancelling the timer
If the timer is running in the background, use
1.
select the timer beforehand.
Press
.
2.
a If a timer duration has been set, this continues to
count down. While the child lock is active, the timer
duration cannot be changed. To end signal tones,
e.g. once the timer duration has elapsed, press any
button.
13.2 Deactivating the childproof lock
Press and hold
for approx. 4 seconds.
1.
The controls are unlocked.
2.
Childproof lock en
to display the
to
15
Advertisement
Table of Contents
