Table of Contents
Advertisement
Press "Start".
4.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears on the display.
Confirm the message.
5.
a The cleaning function starts and the duration counts
down.
a For your safety, the appliance door locks once a
certain temperature is reached in the cooking com-
partment. appears on the display.
a A signal tone sounds when the cleaning function
has finished. A message appears on the display
confirming that the operation has finished.
Press
to switch the appliance off.
6.
→ "Preparing the appliance after the cleaning func-
7.
tion", Page 37.
Cancelling the cleaning function
You can no longer stop or change the cleaning func-
tion once it has started.
To cancel the cleaning function, press
▶
the appliance off.
Cleaning aid "humidClean"
22 Cleaning aid "humidClean"
The cleaning aid "humidClean"
for occasionally cleaning the cooking compartment.
The cleaning aid softens dirt by vaporising the soapy
water. It is then easier to remove the dirt.
22.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
▶
when the cooking compartment is hot.
Note: The oven light does not come on during the
cleaning aid.
Requirement: The cooking compartment must have
cooled down completely.
Remove any accessories from the cooking compart-
1.
ment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
Do not use distilled water.
▶
Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
Press "Cleaning".
3.
Press "humidClean".
4.
The duration cannot be changed.
Press "Start".
5.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid ap-
pears on the display.
to switch
is a quick alternative
21.3 Preparing the appliance after the
cleaning function
Allow the appliance to cool down.
1.
Wipe off any ash that has been left behind in the
2.
cooking compartment, on the shelf supports and
around the appliance door with a damp cloth.
Slide the pull-out rails out and in several times.
3.
While the cleaning function is running, the rails may
become discoloured. This discolouration does not
compromise the functionality of the appliance.
Remove white residues with lemon juice.
4.
Note: White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
Note: While the cleaning function is running, the frame
on the inside of the appliance door or other parts of
the door that are made of stainless steel become dis-
coloured. This discolouration does not compromise the
functionality of the appliance. The discolouration can
be removed using a stainless steel cleaner.
Confirm the notification.
6.
a The cleaning aid starts and the cooking time counts
down.
a Once the cleaning aid has ended, a signal tone
sounds. A notification appears on the display con-
firming that the operation has finished.
Press
to switch the appliance off.
7.
→ "Cleaning the cooking compartment after using
8.
the cleaning aid", Page 37.
22.2 Cleaning the cooking compartment
after using the cleaning aid
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
After using the cleaning assistance, wipe the cook-
▶
ing compartment and allow it to dry completely.
Allow the appliance to cool down.
1.
Wipe out the remaining water in the cooking com-
2.
partment using an absorbent sponge cloth.
Clean the smooth enamel surfaces in the cooking
3.
compartment with a dish cloth or a soft brush. Re-
move stubborn food remnants using a stainless
steel scouring pad.
Remove limescale with a cloth soaked in vinegar,
4.
and wipe this away with clean water.
Dry the cooking compartment with a soft cloth.
5.
To dry the cooking compartment completely, leave
6.
the appliance door open for approx. 1 hour or use
the "Drying" function.
→ "Setting the drying process", Page 38
Cleaning aid "humidClean" en
37
Advertisement
Table of Contents
