Table of Contents
Advertisement
en "Pyrolytic activeClean" cleaning function
Do not use stainless steel wool.
▶
Do not use cleaning agents or descalers containing
▶
acids.
Only use oven cleaner when the cooking compart-
▶
ment is cold and in accordance with the manufac-
turer's specification.
A glass scraper damages the surfaces of the appli-
ance.
Only use glass scrapers to clean the camera lens in
▶
the cooking compartment.
"Pyrolytic activeClean" cleaning function
21 "Pyrolytic activeClean" cleaning function
With the "Pyrolytic activeClean"
cooking compartment is cleaned virtually automatically.
Use the cleaning function to clean the cooking com-
partment every two to three months. You can use the
cleaning function more often, if required. The cleaning
function requires approx. 3.6 - 4.7 kilowatt hours.
The cleaning function requires approx. 3.9 - 4.8 kilo-
watt hours.
21.1 Preparing the appliance for the
cleaning function
To achieve a good cleaning result and prevent dam-
age, prepare the appliance carefully.
WARNING ‒ Risk of fire!
Combustible objects that are left in the cooking com-
partment may catch fire.
Never store combustible objects in the cooking
▶
compartment.
If smoke is emitted, the appliance must be switched
▶
off or the plug must be pulled out and the door
must be held closed in order to stifle any flames.
Loose food remnants, fat and meat juices may catch
fire when the cleaning function is in progress.
Before you start the cleaning function, always re-
▶
move coarse dirt from the cooking compartment.
Never clean accessories at the same time.
▶
The outside of the appliance gets very hot when the
cleaning function is in progress.
Never hang combustible objects, e.g. tea towels, on
▶
the door handle.
Leave the front of the appliance clear.
▶
Keep children at a safe distance.
▶
If the door seal is damaged, a large amount of heat is
generated around the door.
Do not scrub or remove the seal.
▶
Never operate the appliance if the seal is damaged
▶
or missing.
1.
Remove the water tank from the appliance.
Remove accessories and cookware from the cook-
2.
ing compartment.
You can also clean the shelf supports along with the
pull-out rails.
Remove coarse dirt from the cooking compartment
3.
and from the shelf supports.
Use a detergent solution and a soft cloth to clean
4.
the surfaces at the edges of the cooking compart-
ment around the door seal.
Do not remove or scrub the door seal.
Use oven cleaner to remove stubborn dirt from the
inner door pane.
36
cleaning function, the
Requirement: The appliance has cooled down.
Wipe the camera lens with a soft cloth once the ap-
1.
pliance operation has ended.
Use a glass scraper to remove any heavy soiling.
2.
Note: The cleaning function "Pyrolytic activeClean" also
cleans the camera lens.
Remove any objects from the cooking compartment.
5.
The cooking compartment must be empty except for
the shelf supports.
21.2 Setting the cleaning function
Ventilate the kitchen while the cleaning function is run-
ning.
WARNING ‒ Risk of harm to health!
The cleaning function heats up the cooking compart-
ment to a very high temperature so that food left over
from roasting, grilling and baking will burn off. This pro-
cess releases vapours, which can irritate mucous mem-
branes.
Keep the kitchen well ventilated while the cleaning
▶
function is running.
Do not remain in the room for long periods.
▶
Keep children and pets away.
▶
WARNING ‒ Risk of burns!
The cooking compartment gets very hot when the
cleaning function is in progress.
Never open the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
The outside of the appliance gets very hot when the
cleaning function is in progress.
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Note: The oven light does not light up while the clean-
ing function is running.
Requirement: → "Preparing the appliance for the
cleaning function", Page 36.
Press "Cleaning".
1.
Press "Pyrolytic activeClean".
2.
Press "Level" to set the cleaning setting.
3.
Cleaning set-
Cleaning
ting
level
1
Low
2
High
The duration cannot be changed.
You can delay the time at which the operation
should be ready.
→ "Setting the end time", Page 19
Duration in hours
Approx. 2:15
Approx. 2:30
Advertisement
Table of Contents
