Removing And Installing The Panel - Yamaha TRICITY 155 ABS 2017 Owner's Manual

Periodic maintenance and adjustment
Removing and installing the
panel
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time the panel needs
to be removed and installed.
1. Panel A
Panel A
To remove the panel
1. Open the seat. (See page 4-15.)
2. Remove the screws, and pull the
panel off while closing the seat
slightly as shown.
2
1. Panel A
2. Screw
EAU18752
1
EAU56942
2
1
7-7
To install the panel
1. Place the panel in the original po-
sition while closing the seat slight-
ly, and then install the screws.
2. Close the seat.
7