Yamaha TRICITY 155 ABS 2017 Owner's Manual page 24

Instrument and control functions
Multi-function display
1. Multi-function display
Under normal conditions, the multi-
4
function display can be set to display
the following.
odometer "ODO"
tripmeters "TRIP 1" or "TRIP 2"
oil change tripmeter "OIL TRIP"
V-belt
"BELT TRIP"
Push the "SELECT" button to switch
the display between the odometer ,
tripmeters 1 and 2, the oil change trip-
meter and the V-belt replacement trip-
meter in the following order:
ODO → TRIP 1 → TRIP 2 → OIL TRIP
→ BELT TRIP → ODO
To reset tripmeter 1 or 2, select it by
pushing the "SELECT" button, and
then push the "RESET" button for one
second.
TIP
The odometer will lock at 999999.
Tripmeters 1 and 2 will reset and
continue counting after 9999.9 is
reached.
replacement tripmeter
Fuel reserve tripmeter
1
1. Fuel reserve tripmeter
When approximately 1.6 L (0.42 US
gal, 0.35 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter and the fuel level warning indica-
tor will start flashing. The display will
automatically change to the fuel re-
serve tripmeter and start counting the
distance traveled from that point. In
this case, push the "SELECT" button
to switch the display in the following
order:
F → TRIP 1 → TRIP 2 → OIL TRIP →
BELT TRIP → ODO → F
To temporarily turn off the fuel reserve
tripmeter, select it by pushing the "SE-
LECT" button, and then push the "RE-
SET" button for one second. To turn
the fuel reserve tripmeter back on, turn
the key to "OFF" and then to "ON". The
fuel reserve tripmeter will be displayed
again after one minute.
The fuel reserve tripmeter will reset au-
tomatically and disappear after refuel-
ing and traveling 5 km (3 mi).
4-7
1