Chassis Grounding Screw; Internal Real-Time Clock; Digital Routing - National Instruments cRIO-905 Series User Manual

Chassis Grounding Screw

1. Chassis Grounding Screw
Note For information about grounding the cRIO-905x, see Grounding the
Controller in the cRIO-905x Getting Started Guide.
Note For more information about ground connections, visit
the Info Code

Internal Real-Time Clock

The cRIO-905x contains an internal real-time clock that maintains system time when the
cRIO-905x is powered off. The system clock of the cRIO-905x is synchronized with the
internal real-time clock at startup. You can set the real-time clock using the BIOS setup utility
or MAX, or you can set the real-time clock programmatically using LabVIEW.
Refer to the model specifications on
specifications.

Digital Routing

The digital routing circuitry of the cRIO-905x manages the flow of data between the bus
interface and the acquisition and generation sub-systems when programming C Series modules
in Real-Time (NI-DAQmx) mode. The subsystems include analog input, analog output, digital
14 | ni.com | cRIO-905x User Manual
Figure 5. cRIO-905x Chassis Grounding Screw
1
.
emcground
ni.com/manuals
ni.com/info
for the real-time clock accuracy
and enter