Deactivating Flight Mode - Permobil R-net LED User Manual

3.2.2

Deactivating flight mode

1. Turn on the power wheelchair.
2. Go into seat mode by using the mode button on the joystick or OMNI
display. If the control panel does not have a mode button use the left
paddle switch for mode selection. A switch plugged into the 1/8"
monojack port of the joystick or OMNI display can also be used for mode
selection.
3. If the control panel is an OMNI programmed for switched driver controls
continue from step 6.
18 - ConnectMe