Silvercrest 307613 Operating Instructions Manual page 28

NOTES
► If larger pieces of food start collecting on the wall of the bowl during
processing, lift the motor unit
bowl
removed with a spatula.
► Particularly hard foods should be cut into small pieces (approx. 2 cm)
before processing. Otherwise, the motor unit could block.
Use a 'pulsing' processing method when working with hard foods. To do
this, press the relevant speed button
► If the food is not completely chopped, you can either cut it into smaller
pieces or lift the motor unit
bowl
8) Once the food is fully chopped, release the speed button
9) Remove the power plug from the socket.
WARNING! – RISK OF INJURY!
► Never attempt to remove food from the bowl
turning. There is a risk of injury and food can also spray out and make a mess.
10) Wait until the blade
11) Lift the motor unit
12) Remove the connecting piece
WARNING! – RISK OF INJURY!
► Handle the extremely sharp blade
Keep the blade
13) Carefully pull the blade holder
14) Remove the food.
NOTES
► Chopping harder, abrasive foods can cause the bowl
appearance after a while. This is normal and will not impair the functioning
of the appliance.
► After you have finished processing the food, you can use the base
lid for the bowl
–
Remove the motor unit
–
You can leave the blade holder
you wish.
–
Remove the base
closes off the bowl
SMZT 260 A1
a firm shake and restart the processing. Any residues can be
a firm shake and restart the processing.
has come to a complete standstill.
off the connecting piece
out of the reach of children.
to keep the food fresh for longer.
from the underside of the bowl
around. You can now place the base
.
off the connecting piece
/ several times briefly in succession.
off the connecting piece
while the blade
.
.
with caution as it can cause injuries.
with the blade
and the connecting piece
with the blade
on the bowl
. Give the
. Give the
/ .
is still
out of the bowl .
to take on a dull
as a
from the bowl
in the bowl if
. Turn the base
so that it
GB │ IE │
25
.
■