HP 732pk Maintenance And Service Manual page 21

This procedure includes USB3.0 A, USB Type-C connectors.
The connectors are on the USB board (board part number USB1QA6)
The connectors' identifiers are as follows:
Connector
USB 3.0 A
USB Type-C
CN154
Before repairing connectors, follow these steps:
▲
Prepare the monitor for disassembly. See Preparation for disassembly on page 13.
IMPORTANT:
• Repair Condition: Connector repair is only for out of warranty.
• Repairing must operate by professional repairers (Note) in repair center, not applicable for end
user.
• Electrostatic protection is required when component replacement is required.
• The monitor meets ROHS, please use Lead-free solder wire for soldering.
• If Connector need to replace, must check specification and part number whether match the BOM
and location.
Main Board
Location
CN154
CN152
CN152
19