Table of Contents
Advertisement
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display does not show the time
during the off status.
It takes too long to cook the dishes
or they cook too quickly.
Steam and condensation settle on
the food and in the cavity of the
oven.
The display shows "C3".
The display shows an error code
that is not in this table.
The appliance is activated and does
not heat up. The fan does not oper‐
ate. The display shows "Demo".
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.
Possible cause
The necessary settings are not set.
The automatic switch-off is activa‐
ted.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The display is deactivated.
The temperature is too low or too
high.
You left the dish in the oven for too
long.
The cleaning function does not op‐
erate. You did not fully close the
door, or the door lock is defective.
There is an electrical fault.
The demo mode is activated.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Remedy
Make sure that the settings are cor‐
rect.
Refer to "Automatic switch-off".
Refer to "Using the Child Lock".
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Replace the lamp.
Touch
and
at the same time
to activate the display again.
Adjust the temperature if necessary.
Follow the advice in the user man‐
ual.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
Fully close the door.
•
Deactivate the oven with the
house fuse or the safety switch
in the fuse box and activate it
again.
•
If the display shows the error
code again, contact the Custom‐
er Care Department.
Refer to "Using the settings menu"
in "Additional functions" chapter.
.........................................
.........................................
.........................................
ENGLISH
19
Advertisement
Table of Contents
