Optional Accessories; Communication Box; Xkm 3200 Wl Plt - Miele PDR 514 Operating And Installation Instructions

Optional accessories

Communication box

The optional communication box allows external hardware from Miele and other suppliers
to be connected to the Miele Professional machine. External hardware includes, e.g. pay-
ment system, peak-load system, pressure sensor or an external vent flap.
The communication box is supplied with mains voltage by the Miele Professional machine.
The separately available set consists of the communication box and fasteners for installa-
tion on the machine or on the wall.
XKM 3200 WL PLT
The optional Miele communication module can be used to establish a data connection
between a Miele Professional machine and a data processor in accordance with the Ether-
net or WiFi standard.
This communication module fits into the communication slot which is a standard feature on
all machines. The communication module offers the option of intelligent app-based com-
munication with external systems (such as central smart payment terminals or payment
systems). In addition, it can display detailed machine and programme status information.
This module forms the basis for wired communication with Miele MOVE.
It is not possible to integrate the machine into the "Miele@home" app for domestic in-
stallations.
The communication module is intended exclusively for commercial use and is supplied
with mains voltage directly via the Miele Professional machine. No additional power con-
nection is required. The Ethernet interface provided via the communication module com-
plies with SELV (safety extra low voltage) requirements in accordance with EN 60950.
Connected external machines must also comply with SELV.
Data protection and data security
When you activate the networking function and connect your machine to the Internet, your
machine sends the following data to the Miele Cloud:
- Machine serial number
- Machine model and technical features
- Machine status
- Information about the software status of your machine
Initially, this data cannot be assigned to a specific user and is not saved permanently. Data
cannot be saved permanently or assigned to a specific user until after you have linked your
machine to a user. Data transmission and processing are governed by Miele's strict security
standards.
Factory default settings for network configuration
You can reset all of the settings on the communication module or your integrated WiFi
module to the factory default settings. The network configuration should be reset whenever
a machine is being disposed of or sold, or if a used machine is being put into operation. This
is the only way to ensure that all personal data has been removed and the previous owner
will no longer be able to access the machine.
Copyright and licences
For the purpose of operating and controlling the communication module, Miele uses propri-
etary or third-party software that is not covered by open source licensing terms. This soft-
ware/these software components are protected by copyright. The copyrights held by Miele
and third parties must be respected.
52