Deleting Programs; Deleting All Programs; Deleting A Single Program; Maintaining The System - Abbott Prodigy 3855 System Manual

Deleting Programs

This section provides information for deleting programs.

Deleting All Programs

To delete all of the programs form an authorized patient programmer and clear the programmer's memory:
1. From the Operational Display screen, press a Scroll key until the Menu icon (M) appears in the user option 1.
window.
2. Press the Select key. The Menu screen appears. 2.
3. 3. Press a Scroll key until the selection arrow is under the Authorization icon.
Figure 75. Select the Authorization icon
4. Press the Balance key; then press the Select key. The following screen appears. 4.
Figure 76. PROGRAMMER AUTHORIZED screen
5. Press the Balance key; then press the Select key. The following screen appears. 5.
Figure 77. DELETE ALL PROGRAMS warning screen
NOTE: Pressing the Select key in the next step permanently deletes all programs and authorization
information from the programmer.
6. To delete all programs, press the Select key. (Otherwise, press the Previous Screen key.) The programmer 6.
deletes all programs, reinitiates communication with the IPG, and ensures its authorization with the IPG.

Deleting a Single Program

To delete an individual program from the patient programmer, connect a Rapid Programmer™ system to the
patient programmer and follow the Rapid Programmer unit's menu instructions. If a Rapid Programmer
system is not available, you cannot delete a program but must modify an unused program already stored on
the patient programmer.

Maintaining the System

This section contains information about maintaining different parts of the neurostimulation system.

Maintaining and Cleaning the Programmer

Occasionally clean your programmer, and inspect it for damage before using it. Other than these activities, the
programmer does not need any other routine maintenance, testing, or service.
31