Table of Contents
Advertisement
4. Technical specifications (III)
4.8. Firmware
Upgradable via RS485, MODBUS
4.9 Product Material
The ULP SUMMIT HEATED is engineered to be a robust device with a minimal downtime. This
new shape has been designed for optimum water spillage which implies lower probability of ice
formation. The heating system prevents ice from forming on the anemometer.
The input wires are protected by Transient Voltage Suppression (TVS) diodes. The instrument
body is built with Polyamide.
4.10 Quality Control
Every single unit is calibrated with accuracy, following the same calibration standards for each
one in a wind tunnel.
A Q/C report for both wind speed and direction is generated and kept in our files. Standard devia-
tion is checked to guarantee that each unit has been calibrated to the highest standards.
5. Firmware Upgrade
NEW!
Firmware upgradable and configurable via cable using the configurator ( https://calypsoinstru-
ments.com/technical-information). A USB converter cable is available as an accessory on calyp-
soinstruments.com.
Link to Firmware upgrader:
https://drive.google.com/drive/folders/1jg5BcCEpkXBLXEEYmGXeLNyOimmEb3Sm
ULP SUMMIT HEATED User Manual
12
Advertisement
Table of Contents
Need help?
Do you have a question about the ULTRA-LOW-POWER ULTRASONIC SUMMIT HEATED and is the answer not in the manual?
Questions and answers