Philips sonicare Manual page 14

14
English
Step 1: Place the handle on the charger.
Step 2: Press and hold power on/off button for up to 3
seconds.
Step 3: Let go of the power on/off button when you hear 1
beep.
If you see the battery indicator flash green 2 times and hear 3
tones from low to high, then the feature has been activated
OR
If you see the battery indicator flash amber 1 time and hear 3
tones high to low, then the feature has been deactivated.
Charging and battery status
Note: Using the EasyStart feature beyond the initial
ramp-up period is not recommended and reduces
Sonicare's effectiveness in removing plaque.
This Philips Sonicare toothbrush is designed to provide at
least 28 brushing sessions, each session lasting 2 minutes
(14 days if used twice per day) on a fully charged battery.
The battery indicator shows the battery status when you
complete the 2-minute brushing session, when you pause
the toothbrush, or while it is charging.
Note: It can take up to 24 hours to fully charge the
battery before first use, but you can use the Philips
Sonicare toothbrush before it is fully charged.