Summit FF1142PL User Manual page 9

9
Reversing the door
The side at which the door opens can be
changed, from the right side (as supplied)
to the left side, if the installation site
requires it.
Warning! When reversing the door, the
appliance must not be connected to the
electrical grid. Ensure that the plug is
removed from the outlet.
1. Stand the refrigerator upright.
Open the upper door to take out all door
racks (to avoid rack damage) and then
close the door.
remove the screw cover ① and loosen
2. Stand the refrigerator upright, first
the screw ② and unscrew the upper
hinge over ③ which is at the top right
corner of the refrigerator, and use a putty
screw hole cover ④ which is at the top
knife or thin-blade screwdriver to prize the
left corner of the refrigerator .
4. Remove the upper door and place it on a
smooth surface with the panel facing
upwards. Loosen the screws
part ○ 1 , then screw in part
side.
5. Loosen the screws used to hold the
middle hinge and remove the middle hinge.
Then, remove the lower door.
○
2 , detach
○ 1 on the left