Cleaning And Maintenance; Troubleshooting - universalblue UVP1102-24 User Manual

Standing fan
Table of Contents

Advertisement

Available languages

Available languages

time has elapsed.
18. On/Off/Speed button. If the fan is off,
pressing the button will turn the fan
on, the system will automatically
activate at the minimum speed.
• Once the fan is on, each press of
the button will cycle through the
different speeds.
• To turn off the fan, hold the button.
19. Wind modes.
different types of air.
• Natural: Automatically changes
speed from high to low.
• Sleep: regulates the temperature
and
can
automatically.
20. Swing mode. Press this button to
swich on/off the Swing mode.
21. Indicator screen. This shows the
activated functions.
Remote control (
The device incorporates a remote control,
for a more comfortable and efficient use.
In order for the remote control to work, it
must always be aimed at the fan.
Before you start using it, please take a few
minutes to familiarize yourself with the
functions:
22. Timer. Activation of the timer,
possible use of 1 hour, 2 hours, 3
hours and 4 hours. The desired
time is displayed on the fan. To
deactivate the timer, press the
button again after the maximum
time has elapsed.
23. Swing mode. Press this button to
swich on/off the swing mode.
24. +/-. Adjust the types of speeds, to
increase the speed press the '+'
button, to decrease the speed press
the '-' button.
25. Wind modes.
different types of air.
• Natural: Automatically changes
speed from high to low.
• Sleep: regulates the temperature
and can automatically switch off.
26. Power button. Press to turn on the
Selection
of
be
switched
see picture 03 on page 5)
Selection
of
fan.
27. Off button. Press to turn the fan off.

CLEANING AND MAINTENANCE

To clean the fan, follow these instructions:
• Turn the fan off and wait until it has
stopped completely.
the
• Disconnect it from the power supply.
• Be careful to prevent any liquid from
getting inside the appliance.
• Use only a soft damp cloth.
• Do not allow water at a high temperature
off
in contact with the plastic parts.
• Do not use abrasive cleaners. You can
use a neutral detergent.
• When you have finished cleaning it,
assemble it again and store it in a dry
place.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
Follow these indications in order to
optimize the maintenance:
• To clean the humidifier externally, use
a soft cloth immersed in water at 40°.
• Do not use sharp or hard objects to
scratch
ceramic part for transduction. It can
only be cleaned with a soft, damp cloth.
• Do not use a cloth with a chemical
solvent, gasoline, kerosene, or polishing
powder to clean the surface.
• Do not use random detergent for
cleaning. It is best to use clean water.
• Keep water away from the body of the
machine to prevent moisture from
internal electrical components that can
cause malfunction.
the
• Readjust the visible screws from time
to time to ensure a good performance of
the appliance.
TROUBLE SHOOTING
Occasionally you can solve yourself some
the
vibrating
piezoelectric
EN
25

Advertisement

Table of Contents
loading

Table of Contents