Instanta SureFlow DB1000TF Installation And User Instructions Manual

Instanta SureFlow DB1000TF Installation And User Instructions Manual

Auto-fill water boiler with 'touch-free' dispense

Advertisement

Quick Links

SureFlow Touch-Free
Model: DB1000TF
[CTS10TF]
Auto-Fill Water Boiler with 'TOUCH-FREE' Dispense
INSTALLATION AND USER
INSTRUCTIONS
INSTANTA LIMITED
Canning Road - Southport – Merseyside - PR9 7SN
Tel: (01704) 501114 – W:
www.instanta.com
IB78 – (ISS: 01)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SureFlow DB1000TF and is the answer not in the manual?

Questions and answers

Summary of Contents for Instanta SureFlow DB1000TF

  • Page 1 SureFlow Touch-Free Model: DB1000TF [CTS10TF] Auto-Fill Water Boiler with ‘TOUCH-FREE’ Dispense INSTALLATION AND USER INSTRUCTIONS INSTANTA LIMITED Canning Road - Southport – Merseyside - PR9 7SN Tel: (01704) 501114 – W: www.instanta.com IB78 – (ISS: 01)
  • Page 2: Table Of Contents

    Your new water boiler is designed to give you years of trouble-free service provided that the instructions contained in this manual are followed. All new series Instanta products are energy efficient, simple to operate and easy to service. Find out more about Instanta products at...
  • Page 3: Safety & Environmental Information & Delivery Check-List

    SAFETY INFORMATION Please read the following carefully before starting work on this equipment. A competent person should install this appliance in accordance with the installation instructions for this appliance and all relevant local and national standards including the following: Health & Safety at Work Act IEE Regulations Local &...
  • Page 4: Technical Specification

    The water supply must have a pressure not exceeding 7bar (96psi), and no lower than 2bar (28psi) NOTE: If your water pressure exceeds 7bar, fit a suitable pressure reduction valve. We regret that Instanta cannot be held responsible for any machine malfunctions if the water pressure exceeds that stated. If in doubt, consult your water supply company ELECTRICAL CONNECTION: The boiler must be Earthed.
  • Page 5: Operation

    In addition, a resettable ‘Water Block’ device (Pt. No: HE45004), must be installed in the water supply to the Instanta boiler, to minimise any potential for water leakage in the event of a system malfunction. Whilst every reasonable precaution is taken to prevent an overflow, Instanta cannot be held responsible for any damage caused as a result of incorrect installation or blockage of the overflow or failure to direct the overflow to a safe outlet.
  • Page 6: Regular Daily Use

    To change boiler from “on-demand” default setting to “Timed” dispense: • Place an empty vessel in the cup aperture (to break light-beam). • Switch off on front of unit • Unplug from mains power supply and wait 10 seconds. • Plug boiler back in and at the same time, place hand over sensor for 5 seconds.
  • Page 7: Cleaning

    If in doubt as to the hardness of water supplied in your area, consult your local water authority Preventative Maintenance: AQ35/KIT – The Instanta AQ35 high-flow multi-filter delivers the best quality of water by removing sediment and impurities such as chlorine. The filter also reduces scale build-up which results in lower running costs, improved energy efficiency and longer life expectancy.
  • Page 8: Service Warnings & Fault Diagnostics

    SERVICE WARNINGS AND FAULT DIAGNOSIS Your boiler is fitted with an intelligent fault diagnosing system and is able to detect various fault conditions. Some of these are less serious and the machine will continue to operate as normal, while others are more serious and will disable the unit.

This manual is also suitable for:

Cts10tf

Table of Contents