Toro 23136 Operator's Manual page 18

The Toro Company, 8111 Lyndale Avenue South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
23136 321000001 and Up
Relevant technical documentation has been compiled as required per Schedule 10 of S.I. 2008 No. 1597.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with relevant UK legislation.
Chad Moe
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
January 18, 2024
UK Declaration of Incorporation
Product Description
Concrete Breaker, Compact
Tool Carriers
Invoice Description
HYDRAULIC BREAKER,
DINGO
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro U.K. Limited
Spellbrook Lane West
Bishop's Stortford
CM23 4BU
United Kingdom
General Description Regulation
S.I. 2008 No.
Compact Tool Carrier
1597