Toshiba RAV-GV1101AT8P-TR Service Manual page 99

No. Part name
1. Detachment
Discharge
2
port cabinet
1) Carry out work of 1 of
2) Remove screws for the discharge port cabinet
3) Remove screws for the discharge port cabinet
4) Remove screws of the discharge port cabinet
5) Remove screws of the discharge port cabinet
6) Remove screws of the discharge port cabinet
1. Detachment
Side cabinet
3
1) Carry out work of 1 of
2) Remove screws which fix the inverter
3) Remove screws of the side cabinet and the
4 Remove screws of the side cabinet and the
5) Remove screws of the side cabinet and the
bottom plate. (Hexagonal screw Ø4 × 10, 1 pc.)
6) Remove screws of the side cabinet and
the heat exchanger. (Hexagonal screw
Ø4 × 10, 3 pcs.)
7) Slide the side cabinet upward and then remove
it.(Hook of inverter)
Procedure
.
1
and the partition plate.
(ST1T Ø4 × 8, 3 pcs.)
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
and the motor base. (ST1T Ø4 × 8, 2 pcs.)
and the heat exchanger.
(ST1T Ø4 × 8, 1 pc.)
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
.
1
assembly and the side cabinet.
(ST1T Ø4 × 8, 2 pcs.)
valve fixing plate. (ST1T Ø4 × 8, 2 pcs.)
pipe panel (Rear).
(Hexagonal screw Ø4 × 10, 2 pcs.)
Inverter assembly
Valve fixing plate
- 99 -
Remarks
Motor base
Partition
Discharge port cabinet
Side cabinet
Panel piping (Rear)