Toshiba RAV-GV1101AT8P-TR Service Manual page 101

Step Component
4 Exchange of
electric parts
(Continued)
Procedure
8) Remove the ASM-INV from the
ASM-PANEL-BACK (Fig. 4-7)
9) Remove the ASM-INV from the
ASM-PATITION (Fig. 4-8)
10) Remove the all connectors from the
ASM-PCB(CDB) (Fig. 4-9)
11) Cut the binding band and remove
(Screw:M4x8, 1pc.) (Fig. 4-9)
12) Cut the binding band and remove screw
of Ground (Screw:M4x8, 1pc.) (Fig. 4-9)
13) Remove the ASM-PCB(CDB) of support
spacers 6 positions (Fig. 4-10)
- 101 -
Remark
Hook
(Fig. 4-7)
Slide Up
(Fig. 4-8)
Connectors
(Fig. 4-9)
Screw
binding band
Spacers
(Fig. 4-10)
HEATSINK
(Fig. 4-11)