To Select The Recall Type (Key "R" Setting); To Select Dialling Mode; To Restore The Default Settings - Philips DECT1111S User Manual

To select the recall type (key "R" setting)

The use of some services accessed with R+1, R+2 and R+3 (call
waiting, call forward...) will depend on the flash setting
(short/long) according to your installation type (ISDN, Public,
PABX).
Press the Programming key.
Press R.
Select 1, 2, ..., or 7.
Press the Programming key to save the setting.
Several flash times are available:
1 = 80 ms ; 2 = 100 ms ; 3 = 120 ms ; 4 = 180 ms
5 = 250 ms ; 6 = 300 ms ; 7 = 600 ms
Refer to your PABX user manual to set the flash time.
To select the dial mode
Press the Programming key.
Press *.
Press 1 (pulse mode) or 2 (tone mode).
Press the Programming key to save the setting.
Pulse dialling (also called "loop disconnect") is used in the
countries with DTMF tone dialling capability or using old PABX)

To restore the default settings

This procedure allows to reset the phone to default settings.
Press the Programming key.
Press 9.
Enter your 4-digit PIN code.
Press the Programming key to save the setting.
http://www.philips.com/faqs/dect
1 3