Table of Contents
Advertisement
Set auto prefix
1
Press MENU/OK.
2
Select [Services] > [Auto prefix],
then press MENU/OK to confirm.
3
Enter the detect number, then press
MENU/OK to confirm.
4
Enter the prefix number, then press
MENU/OK to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
•
If the prefix number is set and the detect
number is left empty, the prefix number is
added to all outgoing calls.
•
The feature is unavailable if the dialed number
starts with * and #.
Select the recall duration
Make sure that the recall time is set
correctly before you can answer a
second call. In normal case, the phone
is already preset for the recall duration.
You can select among 3 options: [Short],
[Medium] and [Long]. The number of
available options varies with different
countries. For details, consult your
service provider.
1
Press MENU/OK.
2
Select [Services] > [Recall time],
then press MENU/OK to confirm.
3
Select an option, then press MENU/
OK to confirm.
» The setting is saved.
Dial mode
•
Dial mode is the telephone signal used
in your country. The phone supports
tone (DTMF) and pulse (rotary) dial.
Consult the service provider for detailed
information.
Set the dial mode
.
1
2
3
•
Auto clock
•
•
It synchronizes the date and time
on your phone with the public
switched telephone network (PSTN)
automatically. For the date to be
synchronized, make sure the current
year is set.
1
Note
This feature only applies to models that
support both tone and pulse dial.
Press MENU/OK.
Select [Services] > [Dial mode], then
press MENU/OK to confirm.
Select a dial mode, then press
MENU/OK to confirm.
» The setting is saved.
Note
If your phone is in pulse dial mode, press
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.
Note
This service is network dependent.
Make sure you have subscribed to the caller ID
service before you use this feature.
Press MENU/OK.
EN
31
Advertisement
Table of Contents
