Arize
Lynk
2
TM
METHOD 2
Directly Interconnected Luminaires
CLICK!
Remove end cap from the female connector. Insert
3A
the male connector to the female connector. Make
sure the connector is fully engaged as indicted by
hearing a click.
Optional: Secure the cables using the optional cable
3C
clamp accessory.
Go to METHOD 3 on page 7
Use a jumper cable to connect luminaires if the
3B
distance between them is too long.
2
4
Insert an end cap into the female connector on
the last luminaire in the run, and twist the end cap
clockwise to secure.
6
Installation Guide
1