Table of Contents
Advertisement
Quick Start Guide
3. Power the device in one of two ways:
•
•
Figure 2-3: External power supply configuration
8
Install the 701P SmartPower Module into the 802
Transmitter to power the device.
Move the mechanical slider to expose the external power
supply terminals and power the transmitter with a 10-30
Vdc power source.
Input voltage
Input current
(maximum)
Power supply must be isolated from AC mains and provide
transient free DC input power to the transmitter.
A. Power supply
10-30 Vdc
805 mA
March 2024
www.emerson.com
Advertisement
Table of Contents
