Table of Contents
Advertisement
March 2024
5
Mount transmitter remotely
Emerson has designed the 802 Transmitter to be installed only
in the remote mount configuration, where the sensor is mounted
separately from the housing and then connected to the transmitter
via conduit.
Procedure
1. Install the transmitter according to standard installation
practices.
Make sure to use thread sealant on all connections.
2. To reduce sensor wiring length, mount the transmitter
centrally to all of the measurements. When installing the
transmitter, make sure the conduit entries are facing
downward. If using the mounting bracket (option code
mount the transmitter to a 2-in. (51 mm) pipe.
Figure 5-1: 802 mounting bracket (bottom view)
Postrequisites
For additional remote mounting information, see Emerson.com.
Quick Start Guide
Quick Start Guide
),
B6
15
Advertisement
Table of Contents
