Quick Start Guide
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Les changements ou les modifications apportés à l'équipement qui
n'est pas expressément approuvé par Emerson pourraient annuler
l'autorité de l'utilisateur à utiliser cet équipement.
7.4
Ordinary location certification
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical, mechanical,
and fire protection requirements by a Nationally Recognized Test
Laboratory (NRTL), as accredited by the Federal Occupational Safety
and Health Administration (OSHA).
7.5
Installing in North America
The US National Electrical Code
Code (CEC) permit the use of Division marked equipment in Zones
and Zone marked equipment in Divisions.
The markings must be suitable for the area classification, gas,
and temperature class. This information is clearly defined in the
respective codes.
7.6
USA
7.6.1 N5 USA Division 2, Non-Incendive
Certificate
Markings
Field wiring shall be rated for +172 °F (+78 °C).
Enclosure Type 4X/IP66
Specific Conditions for Safe Use (X):
Only the Emerson SmartPower
replacement.
7.7
Canada
7.7.1 N6 Canada Division 2, Non-Incendive
Certificate
Markings
18
(NEC) and the Canadian Electrical
®
FM24US0017X
NI Class I, Division 2, Groups A, B, C, D
T4 (-50 °C ≤ Ta ≤ +70 °C)
701PBKKF shall be used for
™
FM24CA0008X
NI Class I, Division 2, Groups A, B, C, D
March 2024
www.emerson.com