Table of Contents
Advertisement
Quick Start Guide
3
Provisioning & commissioning
3.1
Provision transmitter
Prerequisites
You must power up the transmitter before the communication
device can interface with the it. For HART
communication via a communication device, an 802 wireless device
descriptor (DD) is required.
Procedure
To obtain the latest DD, go to
Figure 3-1: Connection diagram
A. Communication terminals
Note
The Emerson 475 Field Communicator will not work as a
communication device for the 802 Transmitter.
3.2
Commission transmitter to Gateway
If you ordered the transmitter with a factory-configured network ID
and join key, it should join the network with no user input.
If you're unsure if you ordered the device with the factory-configured
option, you can manually enter the network ID and join key to match
the Gateway.
10
wireless transmitter
®
Software &
Drivers.
March 2024
www.emerson.com
Advertisement
Table of Contents
