Ericsson 86010158 Manual page 40

Ericsson | Antenna Line Configurator
If one or more ALDs are found in the scanning process,
the page is shown as follows:
Fig� 48: Devices: ALD found
① Selects or deselects an ALD
② Selects the AISG protocol scanning options, see
section 9�1�1
③ Connects to the selected ALD
If no ALD is found when scanning the AISG bus, ① fig 48 is
Note
not available�
If the connection is not possible, the following warning
message is shown:
Fig� 49: Devices: Warning message
"Scan could not be started"
40