RGBlink mini-pro v3 User Manual page 65

3
3. Scroll down to find your IP address
If the IP address is not in the same section, manual change of IP address is required. Here are the
steps:
1. Click Start menu, click "Setting"
2. Open Network and Internet > Network and Sharing Center.
3. On the left pane of the new window, click Change adapter settings.
4. You will be displayed with Network Connections of the PC.
Important note: Right click on "Ethernet" or "Local Area Connection" if you want to change
IP of any physical connection. And right click on "WLAN" in case you wish to change IP of any
wireless connections.
5. Choose Properties after right clicking on the network name.
6. Select the Internet Protocol Version 4 (TCP/IPv4), then click Properties.
7. Obtain an IP Address automatically should be selected by default, but please choose the Use
the Following IP Address.
8. Now put your desired IP Address according to your wish its correct format. Change Subnet
mask and default gateway if you want to.
XTOOL App Upgrade
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
64