Upgrade - RGBlink mini-pro v3 User Manual

protocol PTZ.

6.3 Upgrade

1.Tools：
 Firmware ZIP upgrade package
 XTOOL (V1.0.1.10 or higher) -packaged in the ZIP
 Computer with network connection
o Windows (minimum Win 7, Win 10 recommended)
o
macOS (minimum 10.13 High Sierra)
2.Upgrade
2.1 Power on the device and connect LAN ports between PC and device by Cat6 cable;
2.2xEnsure that your computer is on the same network as the mini-pro. The default IP address of
mini-pro is 192.168.0.99, in which case your computers IP address should be in the range 192.16
8.0.xxx (xxx cannot be the same as mini-pro or other device on network) to enable connection
between the mini-pro and your computer.
Check IP of PC:
1
1. Press keys together to open the
Command Prompt; In the dialog type: ms-settings:
network-status.
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
2
2
2. Click on the "Properties" button.
63