Advertisement
100 × 100 VESA Pattern
1.
Use the two installed mounting screws to hang
the monitor on the VESA plate's two top
notches.
Important! The washer (M-C) should be between
the screwhead and the VESA plate.
2.
Screw the two remaining mounting screws
(M-A or M-B) and washers (M-C) through the
bottom two VESA holes.
3.
Tighten the mounting screws with the hex
wrench (C) or a Phillips screwdriver.
75 × 75 VESA Pattern
1.
Use the two installed mounting screws (M-A
or M-B) and washers (M-C) to hang the
monitor from the VESA plate's two keyholes.
2.
Screw the two remaining mounting screws
(M-A or M-B) and washers (M-C) through the
lower two 75 mm VESA holes.
3.
Tighten the mounting screws with the hex
wrench (C) or a Phillips screwdriver.
Important! The screws should be tightened until
snug. Don't overtighten.
M-A
M-B
M-C
C
4X
4X
4X
1X
100
75
VESA
75 100
PATTERNS
9
Advertisement
