Advertisement
Attaching the Arm to a Wall
Wood Wall Studs
Optional: Use a stud finder to locate the studs in the wall.
1.
Mark the stud location with a pencil.
2.
Place a level along the side of the mounting
plate, and use the plate as a template to
mark the location of the holes.
LeviTouch GPW-50
6
3.
Use a 3/16-inch (4.5 mm) bit to drill a hole
2.2 inches (55 mm) deep.
A
B
W-A
W-C
2X
2X
4.
Attach the arm to the wall with the
washers (W-C) and screws (W-A).
LeviTouch GPW-50
5.
Once the Arm is
attached, place the
caps (B) into the
holes.
LeviTouch GPW-50
Advertisement
