Advertisement
Masonry or Concrete Wall
1.
Place a level along the
side of the mounting
plate, and use the plate
as a template to mark
the location of the holes.
2.
Use a 3/8-inch (10 mm)
masonry bit to drill a hole
2.4 inches (60 mm) deep.
LeviTouch GPW-50
W-A
W-B
W-C
A
B
2X
2X
2X
3.
Tap the wall anchors (W-B) into
the holes, and attach the arm to
the wall with the washers (W-C)
and screws (W-A).
4.
Once the Arm is attached, place
the caps (B) into the holes.
LeviTouch GPW-50
LeviTouch GPW-50
7
Advertisement
